• Full HD (1920 x 1080) Native Resolution
  • 6 ms Average Gray-to-Gray Response Time
  • 4000:1 Contrast Ratio
  • Built-In Ethernet Connectivity
  • VGA, DisplayPort, DVI-D, 2 x HDMI Inputs
  • Digital Signage-Capable



The PN-V701 offers the flexibility of supporting portrait and landscape viewing orientations. It is suitable for use in 24/7 environments and is equipped with VGA, DVI-D, DisplayPort, and dual HDMI inputs. Its daisy-chain capabilities allow it to be used in multi-display and video wall installations.

Designed for Video Wall Installations
The PN-V701 was developed specifically with video wall installations in mind. With its combined bezel width of just 4.4mm, large images on a video wall appear nearly seamless. The 69.5" diagonal screen allows you to build video walls with fewer monitors, and therefore fewer bezels, minimizing non-functional areas of the video wall.

Enhanced Image Quality with UV²A and Uniform Color Calibration Technology
The PN-V701 uses Sharp's UV²A technology to help provide efficient use of light from the backlight and prevent light leakage for bright whites and deep black levels. Its 1920 x 1080 resolution also makes fine text and intricate graphics crisp and clear. The 700 cd/m² brightness is designed to provide sufficient brightness in areas with high ambient light, a common obstacle in video wall and digital signage installation locations. The PN-V701 also employs SHARP Advanced UCCT (Uniform Color Calibration Technology) for color and brightness uniformity across the entire video wall.

Hybrid Correction of Color and Brightness
The display characteristics of each small area of the image are measured in terms of RGB input signals. Uniformity of color and brightness is then calibrated and corrected for each RGB signal element with UCCT.

Color Management by 3D LUTs
UCCT uses 3D lookup tables (LUTs) for color management helps achieve augmented color reproduction toward the predetermined target range, enhancing the consistency of color quality between monitors in a video wall installation.

Inverse Scan Function
When high-speed video is played on a video wall, slight image misalignments between vertically placed monitors can occur. The Inverse Scan function is designed to correct this by alternating the scanning direction between vertically adjacent monitors, helping to create smooth and natural images across the video wall.

Choice of Installation Orientation
The PN-V701 offers a choice of landscape or portrait installation, allowing you to select the mode that best suits your display content and application.

Designed for 24/7 Operation
The PN-V701 is well-suited for use in demanding professional applications that require 24-hour operation, seven days a week.

Optional PN-ZR02 Control Kit
When one of the displays in a video wall is outfitted with a remote control sensor box, all the displays can be operated through one remote control.

Support for Optional HDBaseT 2.0 Expansion Card
The PN-V701 features an expansion slot that will accommodate an optional PN-ZB03H HDBaseT Receiver Board. Installing this board allows the display to receive HDMI video, audio, and control signals sent up to 328' via a single Cat6 or higher LAN cable, offering convenient connectivity with your HDMI-compatible source devices, such as computers or Blu-ray players. Compatibility with the HDBaseT 2.0 standard allows you to remotely operate a computer from a USB device connected to the board, reducing the number of cables and installation time required.


Screen Size (Diagonal): 69.5"
Resolution: 1920 x 1080
Panel Type: VA LCD
Bit Depth / Color Support: 8-Bit+FRC (1.07 Billion Colors)
Brightness: 700 cd/m²
Viewing Angle (H x V): 178 x 178°
Screen Area: 60.6 x 34.1" / 153.8 x 86.5 cm
Contrast Ratio: 4000:1
Response Time: 6 ms
Dot Pitch: 0.802 x 0.802 mm
Input Ports: 2 x HDMI – Audio, Video
1 x 15-Pin VGA – Video
1 x DisplayPort – Audio, Video
1 x DVI-D – Video
1 x 1/8" / 3.5 mm – Audio
Output Ports: 1 x DisplayPort – Audio, Video
1 x 1/8" / 3.5 mm – Audio
Ethernet Ports: 1
Display Orientation: Landscape, Portrait
Slot: 1
Power Consumption: Typical: 380.0 W
AC Input Power: 100 to 240 VAC, 50 / 60 Hz
Operating Temperature: 32 to 104°F / 0 to 40°C
Operating Humidity: 20 to 80%
Wall Mounting: 400 x 400mm
Bezel Thickness: 1.5 mm (Bottom)
1.5 mm (Right)
2.9 mm (Top)
2.9 mm (Left)
Duty Cycle: 24 Hours / 7 Days
Dimensions: 60.8 x 34.3 x 4.8" / 154.3 x 87.0 x 12.2 cm
Weight: 81.6 lb / 37 kg
Package Weight: 100.0 lb
Box Dimensions (LxWxH): 73.0 x 42.0 x 15.0"

More Information
Brand Sharp
Model Number PN-V701
Discontinued No
Display Size 66" - 75.9"
Display Type LED
Response Time 6 ms
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account